ASTM A36/A36M-08 Standard Specification for Carbon Structural Steel .
ASTM A36 Using Purpose: Be used in bridge, construction, and general structural. It can be channel steel, steel plate, and steel bar.
ASTM A36 Chemical Character:
| ≤3/4"(≤20) | >3/4"--≤1 1/2" (>20--≤40) |
>1 1/2"--≤2 1/2" (>40--≤65) |
>2 1/2"--≤4" (>65--≤100) |
>4" (>100) |
|
| C % Max | 0.25 | 0.25 | 0.26 | 0.27 | 0.29 |
| Mn % | … | 0.8--1.2 | 0.8--1.2 | 0.85--1.2 | 0.85--1.2 |
| P % Max | 0.04 | 0.04 | 0.04 | 0.04 | 0.04 |
| S % Max | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Cu % Min | 0.20 | 0.20 | 0.20 | 0.20 | 0.20 |
Remarks:
1) Cu’s content is suitable for copper steel.
2) For each 0.01% lower than the specified maximum Carbon content, Mn’s content can be increased 0.06% than its maximum content, however the maximum amount shall not exceed 1.35%.
ASTM A36 Physical character:
| Yield strength | Tensile strength | Elongation rate |
| 36 Min | 58-80 | 20%(200mm) Min |
| (250Mpa)Min | (440-550Mpa) | 30%(50mm) Min |
Additional Requirement:
Can offer Charpy V-notch Impact Test As Request.
A36 Steel Plate Dimensions :
3-20mm x 2000mm x 3000-12000mm
Request a quotation
Please provide the necessary inquiry steel grade, size, quantity.